MasterFadeuser manual
01.09.2014.
- 24 -
L
AMP
:
This button is active only if device supports lamp control. If it supports, when pressed,
anew
“Lamp Control window” will appear. There you can view “Lamp hour counter”,
“Lamp strikes counter” and “Turn On Mode” description fields.
Also it is possible to turn a lamp ON or OFF by long-pressing wanted state button.
Example: "
Lamp OFF
" (
LED fixture
)
S
ENSOR
:
This button label and value are depending from currently selected sensor number. The
label is selected RDM sensor description string, and value is currently sensor reading
value with corresponding measurement unit symbol at end. This value is automatically
updated every 3 seconds.
NOTE!
The sensors are identified by its sequence number in current device. If you
select one device sensor with a number 3, lets say,
“
LED temperature
”, then, if you
switch to another device with different sensor list
– the new device corresponding
sensor with number 3 will be selected and displayed, but it could be any other sensor
type.
If sensor read value is outside of its normal range then button will be marked in RED.
This helps to quickly indicate any abnormal condition.
If the device currently selected sensor number is not present then “--” will appear in
instead of value. This indicates that current device has no such number in sensor list.
When you press this button, Sensor selection window is displayed. Here you can switch
through available Sensors and save newly selected if necessary.
Summary of Contents for Master Fade
Page 1: ......
