companionleisure.com.au
CARE
Rhino swags have the finest water repellent
treatment possible for each type of fabric.
No swag, however, can be as waterproof as
a house, car or similar solid structure. There
are several common and natural causes
that can lead to water in your swag.
CONDENSATION
The polycotton canvas fabrics are coated
with acrylic to repel water. This coating
reduces air permeability and leads to
condensation similar to that which occurs
on car windows under certain conditions.
This is caused by lower temperatures on
the outside of the swag combined with
body heat on the inside of the swag.
When this occurs, avoid touching walls to
reduce contact leakage. Leaving the doors
and windows open will reduce moisture
condensation. Some condensation is
normal with polycotton canvas fabrics and
should not be considered as a defect.
SEAM LEAKAGE
Rhino swags are manufactured by expert
machinists with the finest water repellent
treatment. However, when new and during
heavy rain, some seepage may occur
in the seams through the needle holes
created in the sewing process.
This is normal and can be corrected
with the application of a seam sealing
compound available at camping stores.
MILDEW
To avoid mildew, never put your swag away
wet or damp. However, if mildew occurs,
use a soft bristle brush or sponge with
mild detergent to clean. Let the swag dry
in the sunlight and re-apply seam sealer
compound on the inside of the seams.
REPAIRING A TEAR
For small tears, use a self-adhesive patch
kit. We recommend a canvas or awning
repairer for larger tears.
ZIPPER
If the zipper separates, move the slider
to the beginning of the zipper tape and
re-work the zipper. If this does not work, we
recommend you visit a canvas or awning
repairer in your area.
FADING FABRIC
Do not leave your swag set up in direct
sunlight longer than it is necessary. If left
in sunlight for prolonged periods of time,
fabric will fade and weaken.
