7
RADIANT LP GAS HEATER OWNERS MANUAL
CONNECTION
Your radiant heater is designed to connect directly on to
a 3/8" LH BSP gas cylinder.
Check that the gas valve on the cylinder is in the OFF
position (turned fully clockwise). See figure 2.
Take the heater and attach to the gas cylinder valve and
tighten. See figure 3.
Turn the cylinder gas valve on in an anti-clockwise
direction for one full turn and then check the
connections for leaks with Companion Gas Leak
Detection Spray or soapy water. If a leak is detected
turn the cylinder gas valve OFF and re-tighten all
connections, then retest. See figure 4.
Figure 2
Figure 4
Figure 3