17.
Err
or Cod
es
Error Codes
See the following table for error
codes for the unit. Some codes will have a prefix ‘A’ or ‘B’
depending on the side. A indicates an error on the mineral fuel side, and B indicates an error on
the bio diesel side.
Error Code
Fault
Action
Err 3
No price or pump number set.
Set the pump number or:
Set a price at the pump or at the
controller.
Err 7
Excess flow.
Max Flowrate exceeded.
Err 8
Excess reverse rotation of encoder.
Check product is not flowing back
into the tank once the delivery has
finished.
Err 9
Faulty or disconnected meter
encoder.
1.
Check that encoder is plugged in.
2.
Replace encoder PCB on meter.
Err 10
Configuration Lost.
Reconfigure C4000. Refer to C4000
manual.
Err 12
C4000 memory failure.
Change memory IC.
F-AD-DS1225 (not applicable to
Futra.)
Ped
Abd
Display error.
1.
Check display cable for loose
wires/crimps.
2.
Replace display PCB.
air
Air detected in the system
Air purge is required
blend
The pump is not able to deliver the
blend, or the blend percentage
being delivered differs more than
3% from the requested ratio
Check all supply valves and fuel
levels. Re-authorise the pump and
attempt another delivery
