INSTALLATION AND OPERATION MANUAL
NWKSP1
COMNET SOLAR POWERED SYSTEM
Thank you for purchasing NetWave® from ComNet. This manual will cover how to
install hardware on your enclosure, Configure batteries, cabling and mounting of the
enclosure.
The NetWave® NWKSP1 Solar off the grid power system is designed for applications
where a remote camera or wireless repeater is needed but power is not available
or the cost to run power is too expensive. NetWave Solar is a complete system for
providing remote power to edge communications equipment. The kit includes a
high quality photovoltaic solar panel, valve-regulated lead-acid battery, outdoor
enclosure, solar charge controller, PoE midspan injector and mounting hardware.
The steel outdoor enclosure has a gasket hinged lid with two tamper proof locks
operated by a special key for high security. The enclosure and solar panel can be
mounted on a two to four inch pole or wall mounted with the included mounting
hardware. The included 30A solar charge controller supports an LCD screen for local
diagnostics and system health monitoring, Intelligent PWM charging mode and
battery protection from overcharge and over discharge while the battery provides
outstanding deep cycle and cold weather performance.
