42
5.10.3 Power Alarm Configuration
Power alarm function enables the
Relay
alarm action. Without enabling the power alarm
function, the
Relay
alarm action will not work even if the
Relay
alarm is set. Mark the
check box and select
button.
Power Alarm interface
5.11 IP Configuration
Configure the IP Settings and DHCP client function, and then select
to apply
the new IP settings.
DHCP Client:
Enable
or
Disable
the DHCP client function. When DHCP client
function is enabled, the switch will be assigned an IP address from the network
DHCP server. The DHCP server assigned IP address will replace the default IP
address. After selecting the
Apply
button, a popup dialog box will appear and inform
the user that when the DHCP client is enabled, the current IP address will be lost
and user can find the new IP address on the DHCP server. To cancel the DHCP
client function, select “cancel”.
IP Address:
Assign the IP address that your network is using. If DHCP client
function is enabled and then the user does not need to assign the IP address. And,
