background image

INS_CWFE(1,2)COAX[M]_REV–

11/18/10

PAGE 6

© 2011 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC. 

3 CORPORATE DRIVE | DANBURY, CT 06810 | USA 
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | [email protected]

8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | [email protected]

MECHANICAL INSTALLATION INSTRUCTIONS

FIGURE A

Dimensions are for the CWFE1COAXM standalone ComNet module

INSTALLATION CONSIDERATIONS 

This modem is supplied as a Standalone module. Units should be 
installed in dry locations protected from extremes of temperature and 
humidity.

CAUTION:

 

Take care not to press on any of the LEDs.

WARNING

: Unit is to be used with a Listed Class 2 or LPS power supply rated 

9-24 VDC, 12-24 VAC @ 120 mA.

IMPORTANT SAFEGUARDS: 
A)  Elevated Operating Ambient

 - If installed in a closed or multi-unit rack 

assembly, the operating ambient temperature of the rack environment may 
be greater than room ambient. Therefore, consideration should be given to 
installing the equipment in an environment compatible with the maximum 
ambient temperature (Tma) specified by the manufacturer.

B)  Reduced Air Flow

 - Installation of the equipment in a rack should be such 

that the amount of air flow required for safe operation of the equipment is 
not compromised.

FIGURE B

Dimensions are for a standard ComNet™ one slot module

.156 [3.96 mm]

.313 [7.95 mm]

Reviews: