manualshive.com logo in svg

Comnet CNGE24MS, Installation And Operation Manual

Share
Download
Comnet CNGE24MS Installation And Operation Manual Download Page 7

inS_cngE24mS_rEv–

02/18/13     PagE 7

INSTALLATION AND OPERATION MANUAL 

CNGE24MS

Tech SupporT: 1.888.678.9427

Hardware Overview

Front Panel

The following table describes the labels that are affixed to the CNGE24MS.

Port

Description

SFP ports

16 

×

 100/1000BaseX on SFP port(combo) &  

8 

×

 100/1000BaseX on SFP port 

Giga Ethernet Port 16 

×

 10/100/1000Base-T (combo)

Console

Use RS-232 with DB9 connecter to manage switch.

I

0

1

5 6

7

2

3

8

4

I

0

8

CNGE24MS Front Panel

1. 

Console port (DB9)

2. 

10/100/1000Base-T(X) Ethernet port and 100/1000Base-X SFP (combo port)

3. 

100/1000Base-X Fiber port on SFP

4. 

Reset button: Push the button 3 seconds for reset; 5 seconds for factory default.

5. 

LED for Ethernet ports 1000Mbps Link/Act status

6. 

LED for Ethernet ports 10/100Mbps Link/Act status

7. 

LED for SFP ports Link/Act status

8. 

Front Panel LED Status:

 

»

LED for PW1: When the PWR1 links, the green LED will be light on.

 

»

LED for PW2: When the PWR2 links, the green LED will be light on.

 

»

LED for PW3: When the PWR3 links, the green LED will be light on.

Summary of Contents for CNGE24MS













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands