INS_CNFE2MC2C[/M]_REV–
01/18/12 PAGE 5
INSTALLATION AND OPERATION MANUAL
CNFE2MC2C[/M]
Tech Support: 1.888.678.9427
Assign IP Address to a Module
A unique IP address has to be assigned to each contact over Ethernet application. You
can connect one at a time to change the default IP address. The default IP address of the
CNFE2MC2C[/M] is: 192.168.10.1.
Connect the module on to your local Ethernet network that your PC is connected to, as Figure 1
below, and power on the unit.
Figure 1 – Local Ethernet Application Diagram
Following the steps below to set up your PC IP address to the same subnet as the modules:
»
Disable the machine’s wireless network connection and any other internet connections
that could interfere with the network being created. Select the
Internet Protocol (TCP/
IP)
connection within the Local Area Connection Properties from start, Control Panel, and
Network Connections. Then click
Properties
.
Figure 2 – Local Area Connection Properties Dialog Box
