19
Figure 6 – Power Cable RPM 113 7674/10
Route the lead away from high heat sources in the engine
compartment that may cause lead damage and introduce a fire
hazard. In addition, the lead
should not
be routed near electrical
noise sources such as electronic ignition modules or cruise
control modules.
3.
Secure the cable at several locations within the engine
compartment to prevent possible damage to the cable.
4.
Connect the BLACK lead to the vehicle chassis. Connect the
lead as close to the radio as possible. DO NOT connect the
BLACK lead to the “NEG” or “-“ battery post. Connect the
RED lead to the positive (“POS” or “+”) battery post. See
Figure 6.
#
The power source must have a minimum current supply
capability of 13 amps.
Connect To Ignition Sense
The ignition sense line is used to enable or disable transmit or the
Car Horn Alert option through the vehicle ignition switch. For a