Community iBOX M12 Operation And Installation Manual Download Page 14

 

Community M12 – Installation / Operation Manual - Page 14 

RECOMMENDED DSP SETTINGS  

 

 

M12 Bi-amp (LF) 

 

High-Pass Filter: Butterworth 24 dB / Oct, 50 Hz (Varies based on the full-range system used) 

Low-Pass Filter: Butterworth 24 dB / Oct, 1560 Hz (Varies based on the full-range system used) 

 
Filter 

Type 

PEQ1 PEQ2 PEQ3 PEQ4 

Frequency 

116 Hz 

480 Hz 

800 Hz 

1280 Hz 

Gain 

+3 dB 

-6 dB 

-3 dB 

+3 dB 

2.4 Oct 

5 Oct 

5.5 Oct 

2 Oct 

 
M12 Bi-amp (HF) 

 

High-Pass Filter: Butterworth 24 dB / Oct, 1520 Hz (Varies based on the full-range system used) 

Delay 167us 

 
Filter 

Type 

PEQ1 PEQ2 PEQ3 

Frequency 

2800 

Hz 4300 

Hz 10.8 

kHz 

Gain 

-3 dB 

+2 dB 

-3 dB 

2 Oct 

1.6 Oct 

0.33 Oct 

 
M12 Passive 

 

High-Pass Filter: Butterworth 24 dB / Oct, 50 Hz (Varies based on the full-range system used) 

 
Filter 

Type 

PEQ1 PEQ2 PEQ3 

Frequency 

2800 

Hz 4300 

Hz 10.8 

kHz 

Gain 

-3 dB 

+2 dB 

-3 dB 

2 Oct 

1.6 Oct 

0.33 Oct 

____________________________________________________________________________________________ 

 

WARRANTY INFORMATION AND SERVICE  

 

 

Transferable Warranty "(Limited)” Valid in the USA Only 

 

Community M12 monitor loudspeakers are warranted in the USA to be free from manufacturing defects in 

materials and workmanship for a period of five years, as determined by one of the following two methods, 

whichever is longer: 
 

Starting from the date of retail purchase, as noted on the sales receipt from an authorized Community 

dealer, 

 

 

 

 

 

 

OR 

 
Starting from the date of manufacture, determined by the serial number, if the sales receipt is not available. 

 

This warranty applies to the product; therefore, the remainder of the warranty period will be automatically 

transferred to any subsequent owner. 

 

This warranty applies only to failure of a Community loudspeaker caused by defects in materials and 
workmanship during the stated warranty period.  It does not apply to a unit that has been subjected to 

abuse, accident, modification, improper handling/installation, or repairs made without factory authorization 

or by anyone other than authorized Community Field Service Stations.  This warranty is void if the serial 

number has been defaced, altered or removed. 

 

Products covered by this warranty will be repaired or replaced at the option of Community, without charge 
for materials or labor, provided all the terms of this warranty have been met. 

Summary of Contents for iBOX M12

















Reviews: