Community Distributed Design DS5 Installation And Operation Manual Download Page 2

Distributed Design Series                       Installation and Operation Manual  

 

Page 2

Surface Mount Loudspeakers

Introduction & Product Description

Thank you for your choice of Community's 

Distributed Design Series

 Surface Mount 

Loudspeakers

. This series is comprised of the 

following models: 

Model

Description

DS5

5" 2-way surface-mount*

DS8

8" 2-way surface-mount*

DS8SUB 8" subwoofer surface-mount*

*All models are available in black or white.

The 

Surface Mount Series

 have a unique, 

modern-looking streamlined architectural 

design. Their black or white cabinets are easy 

to customize since they accept a wide variety of 

paints. For durability and improved sonic quality, 

the cabinets have thick-wall, internally-reinforced 

ABS plastic construction. This high-impact 

strength construction reduces resonances, 

and the rounded surfaces further reduce the 

resonances that occur in flat-sided cabinets.

Each model is shipped as a matched pair of 

completely assembled loudspeakers, including 

everything needed for standard installations. 

The DS5 and DS8 are full-range models, each 

with high and low frequency drivers and built-

in crossover networks. The DS8SUB subwoofer 

includes  a  built-in  low  pass  filter  and  can  be 

used in conjunction with either of the full-range 

models in applications benefitting from extended 

low frequency enhancement.

You can use 8-ohm or constant voltage 

distribution with the built-in 70/100 volt 

autoformer. Power is easy to adjust using a 

front-accessible power tap switch.

We urge you to read these instructions carefully 

and familiarize yourself with the features and 

installation methods before you begin the job. 

If you have any questions or concerns, please 

contact Community.

Table of Contents

Introduction & Product Description . . . . .2

Packing List & Feature Identification

  . . .3

Important Safety Instructions  . . . . . . . . .4

Infin-A-Ball™ Mounting System

  . . . . . . .6

Installation & Wiring  . . . . . . . . . . . . . . . .7

Optional Wall Box Mounting

  . . . . . . . . .10

Painting the Loudspeaker . . . . . . . . . . .10 

Specifications

  . . . . . . . . . . . . . . . . . . . .11

Warranty and Servicing Notes  . . . . . . .11

Copyright © 2013 by 

Community Professional Loudspeakers, Chester, Pennsylvania, USA. All Rights Reserved.

Summary of Contents for Distributed Design DS5













Reviews: