Community CP6 Installation Manual Download Page 5

Commercial Design Series - CP6 

Installation Guide  

 

Page 5

WARNING:

 To reduce the risk 

of fire or electric shock, do not 

expose this apparatus to rain or 

moisture.

These servicing instructions are for use by 

qualified service personnel only.  To reduce 

the risk of fire or electric shock do not perform 

any servicing other than that contained in the 

operating instructions unless you are qualified 

to do so.

The loudspeakers described in this manual 

are designed to be ‘flown’ or suspended for 

maximum acoustical performance using a 

variety of rigging hardware, means, and methods 

in some applications.  It is essential that all 

installation work involving the suspension 

of these loudspeaker products be performed 

by competent, knowledgeable persons who 

understand safe rigging practices.  Severe injury 

and/or loss of life may occur if these products 

are improperly installed.  Please read the 

section on wiring and installation for additional 

information.

Important Safety Instructions

Always follow these basic safety precautions 

when using or installing Commercial Design 

loudspeakers and accessories:

• Read these instructions.

• Keep these instructions.

• Heed all warnings.
• Follow all instructions, particularly those 

pertaining to rigging, mounting, hanging and 

electrical connections.

• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings.  

Install in accordance with the manufacturer’s 

instruction.

• Do not install near any heat sources such 

as radiators, heat registers, stoves, or other 

apparatus (including amplifiers) that produce 

heat.
• Only use attachments/accessories that are 

specified and approved by the manufacturer. 
• Refer all servicing to qualified service 

personnel.  Servicing is required when the 

apparatus has been damaged in any way, such 

as power-supply cord or plug is damaged, 

liquid has been spilled or objects have fallen 

into the apparatus, the apparatus has been 

exposed to rain or moisture, does not operate 

normally, or has been dropped.

The terms caution, warning, and danger may 

be used in this manual to alert the reader to 

important safety considerations.  If you have any 

questions or do not understand the meaning of 

these terms, do not proceed with installation.  

Contact your local dealer, distributor, or call 

Community directly for assistance.  These terms 

are defined below:

CAUTION:

 describes an operating condition or 

user action that may expose the equipment or 

user to potential damage or danger. 

WARNING:

 describes an operating condition 

or user action that will likely cause damage 

to the equipment or injury to the user or to 

others in the vicinity. 

DANGER:

 describes an operating condition or 

user action that will immediately damage the 

equipment and/or be extremely dangerous or 

life threatening to the user or to others in the 

vicinity.

L’information de Sûreté Importante

PRÉCAUTION :

 Veuillez toujours suivrent ces 

mesures de sécurité de base lors de l’utilisation 

ou lors de l’installation des haut-parleurs 

Commercial Design et de ces accessoires :

• Lisez et Gardez les instructions.
• Observez tous les avertissements.
• Suivez toutes les instructions, 

particulièrement ceux concernant le 

calage, support, montage et raccordements 

électriques.

• Ne pas utiliser cet appareil près de l’eau.

• Nettoyez seulement avec un tissu sec.
• Ne pas bloquer les ouvertures de ventilation. 

Installer conformément aux instructions du 

fabricant.
• Ne pas installer près des sources de chaleur 

comme les radiateurs, les cuisinières, foyers ou 

autres appareils (y compris les amplificateurs) 

qui peuvent produire de la chaleur.
• Utilisez seulement les accessoires qui sont 

spécifiés et approuvés par le fabricant.
• Référez tout entretient au personnel qualifié 

de service. Ceci est exigé quand l’appareil a 

été endommagé de quelque façon, incluant le 

fil d’alimentation et ou l’embout du fil a été 

endommagé, des liquides ont été renversés ou 

des objets sont tombé à l’intérieur de l’appareil, 

l’appareil a été exposé à la pluie ou l’humidité, 

l’appareil ne fonctionne pas normalement ou a 

été échappé.

Les termes attention, avertissement, et danger 

peut être utilises dans ce manuel pour alerter le 

lecteur aux considérations importantes de sûreté. 

Si vous avez des questions ou ne comprenez 

pas la signification de ces termes, ne procédez 

pas à l’installation. Contactez votre détaillant, 

distributeur, ou Community  directement pour 

assistance. Les termes sont définies ci-dessous:

ATTENTION :

 décrit une condition de 

fonctionnement ou une action d’utilisateur qui 

peuvent exposer l’équipement ou l’utilisateur aux 

dommages potentiels ou au danger.

AVERTISSEMENT :

 décrit une condition de 

fonctionnement ou une action d’utilisateur 

qui peuvent causer des dommages probable à 

l’équipement et/ou à l’utilisateur et  à ceux se 

trouvant à proximité.

DANGER :

 décrit une condition de 

fonctionnement ou une action d’utilisateur qui 

endommageront immédiatement l’équipement 

et/ou seront extrêmement dangereuses et 

qui peut représenter un danger pour la vie à 

l’utilisateur et à ceux se trouvant à proximité.

AVERTISSEMENT :

 Pour réduire 

le risque de feu ou de décharge 

électrique, ne pas exposer cet 

appareil à la pluie ou l’humidité. 

Ces instructions d’entretient sont 

pour l’usage d’un personnel de service qualifié 

seulement. Pour réduire le risque de feu ou de 

décharge électrique n’exécutez aucun entretient 

autrement que ce qui est contenu dans les 

instructions d’opérations à moins que vous êtes 

qualifié pour le faire.

Les haut-parleurs décrits en ce manuel sont 

conçus pour être accroché ou suspendus afin 

d’atteindre une exécution acoustique maximum 

en utilisant une série de différents matériaux, 

moyens, et méthodes de calage dans certaines 

applications.  Il est essentiel que tout le travail 

d’installation impliquant la suspension de ces 

produits de haut-parleur soit effectué de façon 

sécuritaire par des personnes compétentes 

et bien formées dans les méthodes de calage. 

Des blessures graves et/ou des pertes 

humaines peuvent se produire si ces produits 

sont incorrectement installés. Veuillez lire la 

section sur le câblage et l’installation pour des 

informations supplémentaires.

Summary of Contents for CP6







Reviews: