Model 2 Classic
7
3
Stand two long posts and slide a
short panel into the connector rings.
6
To add the next panel, lift one of the con-
nector rings and use it to capture the new
panel. Assemble your loft by following the
configuration you have chosen (see page
14-15). Go slowly; it is not easy to replace
a panel after a layer is placed on top.
5
Check the joints. Every panel should be
locked in place by four connector rings.
Repeat this step for each panel as you
build your loft.
4
Capture the panel by sliding another
connector ring onto each post, flat side up.
