Assembly
No tools are required for assembly. Assembly is easiest with two
people. Your cot comes packed in a single carton containing:
• Two Cot ends
• Two Cot sides
• Cot bottom
• Mattress
If your shipment is incomplete, please call customer service.
All of our packaging is recyclable (cardboard and LDPE).
Please recycle in accordance with local guidelines.
Adjusting the cot bottom
To change bottom position, insert a key, pen, or other small tool into
slot as shown and retract plungers on both ends.
Reference
G112 Community cot
G257 BackSafe cot
G258 BackSafe evacuation cot
G25E Evacuation cot
To lower the BackSafe side
first lift up on top rail, then squeeze triggers and lower.
To raise BackSafe side
lift up on top rail until latches lock into position.
To change label
Remove clear label holder from rail and replace the paper label as
desired.
Disassembly of Cot for storage
Remove the mattress and bottom of the cot. Flatten cot by bringing the
two sides together.
Lift cot sides off ends.
Cot side
Hinge pin
Cot end
Cot side
(Backsafe cot only)
