background image

Community Playthings

Brightling Road, Robertsbridge, TN32 5DR UK

Phone:  0800 387 457  

www.communityplaythings.co.uk  [email protected]

Retain these instructions for future reference.

© 2011 by Community Products (UK) Ltd                            
FS69 Eu 0514 Revision 07

IMPORTANT

Hide-away wheels

The hide-away wheels can be engaged and disengaged using 
the following procedure:
1.  With one person at each end, tip the unit slightly for-

ward or back.  This allows the toe trim to pivot.

2.  While one person holds the 

item in the tipped position, 
the other rotates the toe 
trim by pulling or pushing 
on one of the hand-holds 
at either end of the toe trim 
to engage or disengage the 
wheels. 

3.  Tip the unit slightly to the 

other side and repeat the procedure with the other toe 
trim

NOTE: To prevent objects from falling off shelves, tip unit 
back and engage the front wheels first.  When disengaging 
wheels, tip unit forward, and release rear wheels first.

  CAUTION

 

c

When engaging or disengaging the wheel system, always 
use two people.  Failure to do this could cause back strain 
or pinching of your hands.

 

c

Always use the hand-holds provided at each end of the 
toe trim.

 WARNING

 

c

When moving the Changing table, always push from an 
end.

 

c

Never move with children nearby.

 

c

Always disengage wheels after moving.

Maintenance

Periodically inspect for cracks, breaks, loose parts, missing 
parts, and/or malfunctions.  Remove the product from service 
when any condition develops that might make operation 
unsafe.

Occasionally use a light oil on the moving metal parts of the 
step assembly.  Do not oil the plastic parts.

Over time the gas spring that lifts the steps may lose pressure.  
This could cause failure of the steps to close and latch.  If this 
happens, call Customer Service for a replacement.

Cleaning

Wipe wood surfaces with a damp cloth and mild detergent. 
Dry immediately. Leaving water or cleaning agent on the 
surface may damage the finish. Do not use solvent cleaners 
on any parts of your Changing table.

The contoured pan can be washed with soap or mild deter-
gent and water.  Iodine products will discolour the pan and 
pine oil based cleaners may weaken the surface. Do not use 
rubbing alcohol to clean the surface.

Steps should be wiped periodically to remove dirt or sand 
which may prevent the proper functioning of the moving 
parts.  

Construction

The wooden components are manufactured from solid birch 
and birch plywood protected with a child-safe finish.

The metal treads are finished with anti-slip paint.

User Modifications

We cannot be responsible for modifications made by custom-
ers to our products in the field without our supervision, test-
ing, or evaluation.

Ordering Parts

To order replacement parts, contact Customer Service with a 
description of the part(s) needed and the ID Code from the 
product.

Use only replacement parts supplied by  
Community Playthings.

Reviews: