PAGE 3
Installation and Operation Manual
3.2.2 VZ2 Name.
This is a generic entry that has no effect on the VZ2 operation other than to allow the user to enter a name
for the device to help recognize it when parameter updates are required.
3.2.3 IP Address.
The IP address of the unit set to by entering a standard IPv4 dotted quad in this field. 192.168.1.20 or 10.10.0.96
are examples of acceptable formats for this field. Clicking the Submit button will set the entered IP
parameters.
3.2.4 Broadcast.
The Broadcast entry is used to control the propagation of network broadcast packets on the network and to
what level they will propagate from the device. This is frequently opposite of the Netmask setting. This is
used by the PTP functions to advertise the presence of the server. Clicking the Submit button will set the
entered IP parameters.
3.2.5 Netmask.
The Netmask entry determines what addresses are on the local network and what addresses are reached
through the Gateway. Typical Netmasks are 255.255.0.0 or 255.255.255.0. Consult the network administrator
for more information on how this entry should be set. Clicking the Submit button will set the entered IP
parameters.
3.2.6 Gateway.
The Gateway IP address is used when a destination address is determine to not be on the local network.
Consult the network administrator for this setting. Clicking the Submit button will set the entered IP
parameters.
3.2.7 Time Zone Pull down.
Setting the time zone pull down allows the unit to know what time zone it is placed in. Clicking the Submit
button will set the entered IP parameters.
3.2.8 Password.
The Password of the unit can be changed in this field. The existing password is not displayed for security
purposes. Enter the new password and click the “Change Password” button to update. The VZ2 will then
prompt for the new password to be entered to continue access to the web pages.
Default Username: admin / Default Password: tmachine
3.3 Status Page.
The status page is an information only page. It shows the various pieces of information about the current
working state of the device.
3.3.1 Location.
Location shows the latitude and longitude of the device itself based on the GPS receiver.
3.3.2 Date/Time.
The Date/Time entry shows the current UTC date and time of the device. This is not the local time and is not
updated real time. Refreshing the page will update this time.
