background image

1

 

 

 

 
 

EUROPEAN UNION DECLARATION OF CONFORMITY 

Information Technology Equipment 

 
 

The Company COMMTECH, INC. declares under its own and full responsibility that the product 
 
 

" Fastcom: 232/4-PCI  -  Revision 1.0 " 

 
 
on which is attached this Certificate is compliant to the "89/336/EEC" Directive, amended by 92/31/EEC and 
93/88/EEC. 
 
 
 

[   ]

 

The product identified above complies with the requirements of the above EU Directive by meeting the 

following standards: 

 
•  EN 50081-1 (1992) EMC Generic Emission Standard - Part 1, Residential, Commercial and Light Industry 
 

-  EN 55022 (1995), CISPR 22 (1993) Limits and Methods of Measurement of Radio Disturbance 

Characteristics of Information Technology Equipment, 30 MHz - 1 GHz, Class B Limits 

 
•  EN 50082-1 (1992) EMC Generic Immunity Standard - Part 1, Residential, Commercial and Light Industry 
 

IEC 801-2 (1984), Method of Evaluating Susceptibility to Electrostatic Discharge, Level 4 

 

IEC 801-3 (1984), Radiated Electromagnetic field Requirements, Level 3 

 

IEC 801-4 (1988), Electrical Fast Transient/Burst Requirements, Level 2 

 
 
Products listed on this declaration are exempt from the requirements of the 73/23/EEC directive due to the input 
voltage specification as stated in Article 1 of the directive. 
 
The technical documentation required to demonstrate that this product meets the requirements of the EMC Directive 
has been compiled by the signatory below and is available for inspection by the relevant enforcement authorities. 
 
 
In WICHITA, KS on December 31st of 1995 

 

9011 E. 37th Street North 
Wichita, KS 67226-2006 
(316) 636-1131 
Fax (316) 636-1163 

 

Mr. Glen R. Alvis

 

Chief Engineer 

 

 

Summary of Contents for FASTCOM: 232/4-PCI


















Reviews: