4
7950 V2 Pager
User Guide for 7950 V2
IMPORTANT: Some features, icons, and function menus may not be available on your pager, depending on how the
pager was programmed. This document covers all features and assumes that no functionality has been disabled.
Turning Your Pager On
1.
Press
for 3 seconds. A start-up screen is momentarily displayed and your pager activates the currently
chosen alert. When the pager is on but no activity is taking place, the screen turns off.
NOTE: Press any button to stop the alert.
Turning Your Pager Off
1.
Press to display the
Function
menu.
2.
Press
to move the cursor to ( ).
3.
Press
.
“
TURN PAGER OFF?
”
displays.
4.
Press
again to turn the pager off. The pager turns off and the screen goes blank.
Using the Function Menu
The
Function
menu provides access to the many features of your pager through the use of symbols and prompts.
1.
Press to display the
Function
menu. When the
Function
menu is initially displayed,
flashes to
indicate the location of the cursor.
Example of the
Fully Displayed Function
menu:
2.
Press
,
to move the cursor within the
Function
menu. As you move through the
Function
menu, the
pager function symbols flash to indicate the location of the cursor.
3.
To exit from the
Function
menu without making any changes, press .
Message-Status Screen
The
Message-status
screen shows the current status of your messages. For example, unread messages are indicated
by a flashing
symbol, locked messages are indicated by
.
The
Messages-status
screen also displays the time, date, and any activated pager settings. The
Message-status
screen can be accessed by pressing
or
from the
Standby
screen.
Example of the
Message Status
screen:
