E-Band (80GHz)
Microwave (Low Band)
Assemble 2-off M8 bolts provided
with dual polarized integration kit,
in positions shown, leaving 12mm
of thread showing.
Alignment Dowel
12mm
Torque to
19Nm 5%
(4 Places)
Integration Assembly and Alignment
IMPORTANT NOTE
Low Band OMT MUST be vertically aligned, do NOT adjust alignment from this position.
Assemble integration kits to the frame in accordance with installation instructions provided with the relevant
integration kit.
Microwave (Low Band) Interface Attachment
Dual Polarized Integration Kit (OMT, part number VINTX-DET) only
3
i.
3a
Place OMT over bolt heads as shown and rotate anti-clockwise until alignment dowel makes contact with
OMT.
Unless stated otherwise, the instructions here overrule the ones in the integration kit.
Additional installation requirements for low band and 80GHz ports are shown.
Integrations removed for clarity.
Fit remaining 2 off bolts then torque all hardware to 19Nm 5%.
2 off screws have been
locked in position and
must
NOT
be adjusted.
Remove protective tape and fit O-ring in
accordance with installation instruction
provided with the integration kit.
Do
NOT
rotate feed per
seperate installation instructions,
2 off screws have been locked in
position and must
NOT
be
adjusted.
7836888
B
RE
01
Bulletin
Rev
Status
Model Version
Version
Rev
Status
13 of 24
page
Installation Instructions
B
RE
01
© June, 2018 CommScope
Notice: CommScope disclaims any liability or responsibility for the results of improper or unsafe installation, inspection, maintenance, or removal practices.
Aviso: CommScope no acepta ninguna obligación ni responsabilidad como resultado de prácticas incorrectas o peligrosas de instalación, inspección, mantenimiento
o retiro. Avis : CommScope décline toute responsabilité pour les conséquences de procédures d’installation, d’inspection, d’entretien ou de retrait incorrectes ou
dangereuses. Hinweis: CommScope lehnt jede Haftung oder Verantwortung für Schäden ab, die aufgrund unsachgemäßer Installation, Überprüfung, Wartung oder
Demontage auftreten.
Atenção: A CommScope abdica do direito de toda responsabilidade pelos resultados de práticas inadequadas e sem segurança de instalação, inspeção,
manutenção ou remoção. Avvertenza: CommScope declina eventuali responsabilità derivanti dell’esecuzione di procedure di installazione, ispezione, manutenzione
e smontaggio improprie o poco sicure.
CommScope
1100 CommScope Place SE P.O. Box 339, Hickory, NC 28603-0339
(828) 324-2200 (800) 982-1708
www.commscope.com
Customer Service 24 hours
North America: +1-800-255-1479 (toll free)
Any country: +1-779-435-6500
email: [email protected]
Installation Instructions
ValuLine
®
DualBand Antennas
