manualshive.com logo in svg

CommScope SURFboard SVG2482AC, User Manual, Page: 57 / 66

Share
Download
CommScope SURFboard SVG2482AC User Manual Download Page 57

Chapter 8: Managing your gateway and connected networks

Reboot your SVG2482AC

Choose one of the following options to reboot (or restart) your SVG2482AC:

■

Reboot SVG2482AC using the Reset button

 (page 57)

OR

■

Reboot SVG2482AC Using the Web Manager

Reboot SVG2482AC using the Reset button

To reboot (or restart) your SVG2482AC using the SVG2482AC Reset button:
1. Insert the end of a paper clip (or other small object with a narrow tip) into the indented

Reset button opening on the rear of your SVG2482AC.

SVG2482AC Reset button

2. Press and hold the small object in place for three to four seconds.

Warning: 

 Do not press the Reset button for more than five seconds. If you do,

your SVG2482AC will automatically reset and your custom gateway configuration

settings (e.g., admin password, network name (SSID) and password, Parental

Controls, etc.) will be deleted and replaced with the factory default configuration.

3. Remove the paper clip or small object from the Reset opening.

Reboot SVG2482AC using the Web Manager

To reboot (or restart) your SVG2482AC using the SVG2482AC Web Manager:
1. From any SVG2482AC Web Manager screen, click the 

Troubleshooting 

menu link.

2. Click 

Reset/Restore Gateway

 from the Troubleshooting submenu links.

SURFboard

®

 SVG2482AC Wi-Fi

®

 and Voice Modem for XFINITY

®

 Customers User Guide STANDARD Revision x.5

57

Summary of Contents for SURFboard SVG2482AC



































































Reviews:

No comments