CommScope RUCKUS SmartZone 100, Quick Setup Manual

Page: 1 / 5

RUCKUS SmartZone 100 Quick
Setup Guide
This Quick Setup Guide provides basic instructions for setting up
the RUCKUS SmartZone 100 (SZ100) on the network. For
information on advanced configuration and management options,
see the SmartZone 100 Getting Started Guide and SmartZone 100
Administrator Guide, which are available for download from the
RUCKUS Support website:
https://support.ruckuswireless.com/documents
This Guide in Other Languages
请从以下网站获得该指南的简体中文版
https://
support.ruckuswireless.com .
Vous trouverez la version française de ce guide à l'adresse
suivante https://support.ruckuswireless.com .
このガイドの日本語版は
https://support.ruckuswireless.com
でご覧ください。
이
가이드의 한국어 버전은 웹 사이트
( https://
support.ruckuswireless.com )
에서 확인하시기 바랍니다
.
Veja a versão em português (Brasil) deste guia em https://
support.ruckuswireless.com.
Puede ver la versión en español (América Latina) de esta guía en
https://support.ruckuswireless.com.
Licensing Information
The SZ100 comes pre-shipped with 1000 temporary AP Capacity
Licenses, which are valid for a period of 90 days from when the
SZ100 is configured via the initial setup configuration. For
operation beyond 90 days, you MUST buy permanent AP Capacity
licenses. The purchased Licenses MUST be activated for them to
become valid.
The management of the AP Capacity Licenses and the ability to
activate the permanent License will be through the RUCKUS
Support Portal (https://support.ruckuswireless.com). An email
will be sent to the User that is identified on the Purchase Order
and full instructions as to how to activate the Licenses is included
in the email. As a guide, full instructions can be found at https://
support.ruckuswireless.com/activate.
Using the LiMAN (license management) portal on the RUCKUS
Support website, you can assign licenses to or from a SZ100 or
move them to another SZ100 (see a summary of LiMAN features
in Table 1 ). To physically manage the distribution of licenses from
the Support website to the actual SZ100, do one of the following:
• Connect the SZ100 directly to the Internet.
• Deploy a RUCKUS Local License Server (LLS) within your
network. The LLS must be able to communicate with your
SZ100 and it must be connected to the Internet.
– LLS should first synchronize with the license server in the
cloud to get the required license (as per the SZ100 serial
number)
– Remove licenses from one SZ100 to add to another
NOTE: NOTE: In the event that the SZ100 is not connected to
the Internet and you have not deployed an LLS, you can
download the actual licenses from the Support Portal and
manually upload to the specific SZ100.
For step-by-step instructions on how to activate the SZ100’s
licenses, see Step 5: Activate the SZ100’s Licenses on page 3.
NOTE: The default temporary switch licenses is 100 per node,
and 90 days for the temporary switch license period.
TABLE 1 LiMAN features and how to activate them on the SZ100
LiMAN Features SZ100 Online
(Connected to the
Internet) SZ100 Offline
(Disconnected from
the Internet)
• Register SZ100
controllers,
licenses, support
entitlement
• Add capacity
licenses to SZ100
controllers
• Remove licenses
from one SZ100
and add to
another
No action required.
The SZ100 syncs
with LiMAN
automatically within
24 hours and applies
the appropriate
licenses. Three steps
required:
1. Download the
license file from
LiMAN.
2. Log on to the
SZ100, and
then upload the
license file from
LiMAN.
3. Download the
license
response file
from the SZ100,
and then
upload it to
LiMAN.
Before You Begin
Before deploying Ruckus Networks products, please check for the
latest software and the release documentation.
• Release Notes and other user documentation are available at
http://support.ruckuswireless.com/documents .
• Software upgrades are available at http://
support.ruckuswireless.com/software .
• Software license and limited warranty information are available
at http://support.ruckuswireless.com/warranty .
Package Contents
• One SmartZone 100 appliance with one AC/DC power supply
unit and power cord
• One console cable
• One rack mount kit
• Service Level Agreement/Limited Warranty Statement sheet
• Regulatory Statement sheet
• This Quick Setup Guide
What You Will Need
• Hardware Component Specific information.
TABLE 2 Component Specific Information
Product
Name Label Model
CPU Intel i7-3770 3.40 GHz,
Socket:
FCLGA1155
MB Caswell COB-7400-00
0
Power Enhance ENP-7025D-4
7XGB
RAM Innodisk - 8GB DDR3
1600 DIMM
HDD Western
Digital - 1TB, 3.5”
SATA HDD
• An administrative computer (admin PC) with a connection to
the local area network
• A web browser, such as Internet Explorer, Mozilla Firefox,
Google Chrome or Apple Safari
• The IP address, netmask, gateway and DNS server addresses
assigned to the SZ100 —if it has a static network address
(recommended)
Step 1: Connect the SZ100 to the Network
1. Connect the SZ100 to a convenient power source, and then
press the power switch on the rear panel. The Alarm LED
Copyright
©
2021 CommScope, Inc. All rights reserved. Page 1 of 5
Published January 2021, Part Number 800-72271-001 Rev H