CommScope PFU-P-E-O-060-01, Manual

Page: 20 / 27

1-Port 5Gb PoE Extender Manual
16
Step 6: Sealing the Unit
1.
Ensure the supplied gasket is properly seated in its channel (it only fits in one orientation)
and that all cables are secured.
2.
Apply Loctite 222 to all lid bolts.
3.
Put the lid back in place.
.
4.
Tighten the screws to torque 2.5Nm (22.1 in-lb). It is recommended that the center screws
on each side be tightened first, followed by the corner screws.