CommScope ONECELL RP5200, Hardware Installation Manual

Page: 42 / 72

Chapter A Safety
A-2 M0304AG 5.5.01 April 2021
DR
AF
T
Radiation Exposure Statement
Important: Changes or modifications not expressly approved by CommScope LLC
could void your authority to operate the equipment.
FCC Part 15
The Baseband Controller and RP5100 have been tested and found to comply with the
limits for Class A equipment, pursuant to Part 15 of the FCC Rules.
NOTE
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
For more information, see the publication femtocells and Health at
http:// www.femtoforum.org or visit the FCC website at www.fcc.gov.
EN55032
WARNING
This equipment is compliant with Class A of EN55032. In a residential
environment, this equipment may cause radio interference.
Human exposure limits for ONECELL deployments
The human exposure limits for the ONECELL product is calculated by using the
Maximum Permissible Exposure (MPE) method associated with fixed-type
transmitter devices at a minimum exposure distance of 20 cm.
WARNING
This equipment is not suitable for use in locations where children are likely to be
present.