Figure 8
Proceed as follows:
1. After wiring is complete for jack applications,
snap the modular jack into the appropriate opening
in the baseplate. Refer to Figure 9.
Figure 9
2. Terminate SVGA connector according to color
code on connecting blocks. Assemble connector to
baseplate using hex standoff screws. See
Figure 10.
Figure 10
1. Align the screw holes in the cover with the posts
on the baseplate.
2. Secure by inserting the oval–head screws.
3. Tighten screws.
Figure 11
Updated document to corporate requirements
Added NOTE to Paragraph 4.2
B
Rebranded to CommScope
