4. Commissioning
MF0150A1A.doc
Manual for ION-M17EHP/19P
Page 29
3. If the connector is dirty, clean it with a lint-free wipe (dry cleaning).
4. Inspect the connector.
5. If the connector is still dirty, repeat the dry cleaning technique.
6. Inspect the connector.
7. If the connector is still dirty, clean it with 99% isopropyl alcohol (wet cleaning)
followed immediately with a dry clean in order to ensure no residue is left on
the end face.
8. Repeat steps 5 through 7 until end face is clean.
Note: For a more detailed description, please refer to:
http://www.cisco.com/en/US/tech/tk482/tk876/technologies_white_paper09186
a0080254eba.shtml
4.2.9. Protective Plug
Connection:
A protective plug is provided for the connection of the fibre-optic cables.
figure 4-8 Protective-plug assembly
Note:
Only high-quality connectors must be used for this type of plug.
Qualified brands are Diamond or Huber & Suhner.
