Page 12 of 20.
© 2019 CommScope, Inc.
TC-96272-IP
5.2
Installing Splice Trays
The FOST-ACC-D-TRAY-RR-288 trays used in the splice cabinet are shipped in separate pack-
ages. Use the following procedure to install the splice trays in the cabinet.
1.
Unpack the splice trey. Refer to
. There are two per box.
Figure 11. Unpacking the Splice Tray
2.
Hold the splice tray vertically over the tray holder bracket, and insert the tray hinge into
the designated slot on the tray holder bracket. Lift the red tray support latch up to lower
the tray. Refer to
.
Figure 12. Inserting the Tray in the Tray Holder Bracket
