CommScope Era M0201AKB_uc, Installation Manual

Page: 10 / 60

CommScope Era
™
High Power Carrier Access Point Installation Guide — Preliminary M0201AKB_uc
Page 6 © January 2019 CommScope, Inc.
CAP H Overview
CAP H Connectors and Status LED
The CAP H connectors and Status LED are described in the following sections:
•
"Connectors and Status LED on Models with One Antenna" on page 6
•
"Connectors and Status LED on Models with Two Antenna Connectors" on page 9 .
Connectors and Status LED on Models with One Antenna
•
Figure 2 shows the connectors on an AC version of the CAP H that has one antenna connector.
•
Table 2 on page 7 maps the callouts in Figure 2 and Figure 3 on page 8 and describes the connectors and
STATUS LED.
•
Figure 3 on page 8 shows the connectors on a DC version of the CAP H that has one antenna connector.
Do not remove caps from any of the connectors until instructed to do so.
1
2
3
4
6
7
5
8
Figure 2. Location of Connectors and LED on AC Version with One Antenna Connector