Page 5 of 8
© 2019 CommScope, Inc. All Rights Reserved
8.4.4.
Slide transportation tubing (appox. 40”) over the
feeder ribbon fibers.
8.4.5.
Attach transportation tubing to core tube using
felt tape.
8.4.6.
Route bare ribbon into splice tray.
Note: Fiber splicing should be done in compliance
with company-approved practices. This section
outlines some basic splice organizing techniques to be
followed.
8.4.7.
Make splice per local practice and store splice
protector centered in the splice protector holder.
8.4.8.
When splicing has been completed, re-install top
cover on the tray, re-install splitter with mounting plate and
secure with fastener.
