8
Installation (continued)
8
Attaching the mounting plate to the
TV (VESA 100 and 200)
NOTE:
If the back of the TV is not fl at, or the bolts are too
long, or there is interference between the TV bracket and
cable inlets, we strongly recommend the use of spacers.
This procedure describes how to attach the mounting plate to VESA
100 and 200 TVs. For VESA 300 and 400, proceed to step 9.
□
If necessary, align spacers (EE) or (FF) over the mounting
holes on the back of your TV.
□
Position the wall plate (A) over the TV and attach using the
appropriately sized bolts (CC or DD) and washers
(GG or HH).
CAUTION:
Do not overtighten the bolts as this could
damage your TV.
EE/FF
A
GG/HH
DD
A
GG/HH
100x100 / 200x200
100x100 / 200x200
CC
9
Attaching the mounting plate to the
TV (VESA 300 and 400)
□
Attach the left and right arm extenders (B1 and B2) to the
wall plate (A) using M6 x 8 bolts (II).
□
Align spacers (EE or FF) over the mounting holes on the
back of your TV.
□
Position the wall plate (A) with extenders (B) over spacers
(EE or FF) and attach them to the TV using the appropriate
sized bolts (CC or DD) and washers (GG or HH).
CAUTION:
Do not overtighten the screws as this could
damage your TV.
CC
II
JJ
B1
B2
B1
B2
GG/HH
DD
EE/FF
GG/HH
Summary of Contents for XD2473
Page 1: ...1002 212 025...
