4
Installation
1
Preparing the tape light
□
(optional) Shorten the tape light (A) to the
desired length by cutting along the black lines
with the scissors mark.
A
2
Installing the tape light
□
Ensure that the mounting location is even,
clean, and dry.
□
Remove the protective film from the back of
the tape light (A).
□
Press the tape light (A) to the mounting surface
and hold in place for a few seconds.
A
A
1
3
Installing the control module
□
Install the control module (B) to the mounting
surface using two screws (not included).
□
Align the arrow on the control module (B) to
the +12V mark on the tape light (A).
□
Connect the control module (B) to the tape
light (A).
A
B
4
Connecting the power
□
Connect the AC adapter (C) to the control
module (B).
□
Plug the AC adapter (C) into a wall receptacle.
B
C
