9 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Continuous Mounting
1
Preparing to connect the fixtures
□
Using a screwdriver, punch out the knock out hole on the end of each wrap light housing (A) where the two
fixtures will connect.
2
Mounting end-to-end
□
Insert a 7/8 in. outer diameter fitting
threaded coupler (not included) through both
open knock out holes.
□
Secure the coupler with 2 threaded nuts (not
included).
□
Run jumper wires (not included) through
the threaded coupler to make the electrical
connections.
3
Connecting fixtures with
conduit
□
Insert a type 1/2 in. flexible metal conduit
with a snap-in connector through both knock
out holes to connect the wrap light
housings (A).
A
A
B
B
B
B
B
B
A
A
A
A
