Questions, problems, missing parts? Before returning to the store,
call commercial Electric customer service
8 a.m. - 7 p.m., EsT, Monday - friday
9 a.m. - 6 p.m., EsT, saturday
1-877-527-0313 | HOMEDEPOT.cOM
retain this manual for future use.
cArE AND cLEANINg
CAUTION:
Before attempting to clean the tube and luminaire/light fixture, disconnect the power to the fixture by turning
the breaker off or removing the fuse from the fuse box. clean with a soft, dry cloth. Do not use cleaners with chemicals,
solvents, or harsh abrasives. Do not use liquid cleaner on the LEDs, LED driver, or wiring.
SELEcTINg DOWNLIgHT Or NIgHTLIgHT MODE
The product can be used in one of two modes: downlight mode, which provides full brightness and allows selection
from five color temperatures, or nightlight mode.
nighlight mode provides reduced light output at 2000K
Amber
color temperature for very soft illumination at night.
To TUrn on ThE MAIn LIghT
1. Turn on the light switch to activate the light fixture.
To chAngE To nIghTLIghT MoDE wITh rEDUcED LIghT oUTPUT froM ThE TrIM
1. switch the downlight off and back on again within 3 seconds to activate nightlight mode.
NOTE:
The main downlight will not provide light output when the nightlight trim is illuminated.
To rETUrn To DownLIghT MoDE wITh fULL LIghT oUTPUT whEn In nIghTLIghT MoDE
1. switch the downlight off and back on again to activate the downlight mode.
LIgHT DISTrIbuTION
Item # 1000000000 /Model # 538671010
Maximum Candela = 196.804
Located At Horizontal Angle = 0, Vertical Angle = 0
# 1 - Vertical Plane Through Horizontal Angles (0-180)
# 2 - Vertical Plane Through Horizontal Angles (90-270)
98
49
148
1
2
197
0
Maximum Candela = 196.804
Located At Horizontal Angle = 0, Vertical Angle = 0
# 1 - Vertical Plane Through Horizontal Angles (0-180)
# 2 - Vertical Plane Through Horizontal Angles (90-270)
98
49
148
1
2
197
0
Item # 1000000000 /Model # 538661010
FPO
FPO
color
Temperature
Toggle switch
3500K
3000K
2700K
4000K 5000K
ADjuSTINg THE cOLOr TEMPErATurE OF THE LIgHT
This LED downlight allows you to customize the color temperature of
the light using five settings from
Warm White to Daylight.
1.
2.
choose your favorite correlated color temperature (ccT) from five
options: 2700K
W
arm White, 3000K Soft
W
hite, 3500K
Cool W
hite,
4000K
B
right
W
hite, or 5000K
D
aylight.
Move the toggle switch on the f
i
xture body (A) to make your
selection before inserting into bracket or ceiling.
NOTE
:
The factory setting for the correlated color temperature (ccT)
is 2700K, which is the warmest white light.
TrOubLESHOOTINg
Minor problems often can be fixed without the help of an electrician.
WARNING:
Before doing any work on the fixture, disconnect power to the light fixture.
Problem
Possible cause
Solution
The fixture will not light.
The power is off.
Ensure the power supply is on.
The circuit breaker is off.
Ensure the circuit breaker is in the on position.
There is a bad connection.
check to ensure proper wire connections are made. contact a
qualified electrician.
There is a defective switch.
contact a qualified electrician.
The fuse blows or the
circuit breaker trips
when the light is turned
on.
The wires are crossed or the
power wire is grounding out.
check the wire connections. contact a qualified electrician or
call customer service 1-877-527-0313.
The light fixture flickers
or makes a buzzing
sound.
The dimmer circuit is not
compatible with the product.
The dimming circuit is set outside
the dimming range of the product.
check the product page at www.homeDepot.com for a list of
compatible dimmers.
Turn or slide the dimmer switch to adjust the light output until
the flickering or buzzing stops.
out of sync
slide the dimmer too fast.
Turn off the wall switch for more than 3 seconds, then turn
back on.
The dimmer circuit is not
compatible with the product.
check the product page at www.homeDepot.com for a list of
compatible dimmers.
WARNING:
carefully read and understand the information given in this manual before beginning the assembly and installation.
failure to do so could lead to electric shock, fire, or other injuries which could be hazardous or even fatal. • risk of fire or electric
shock. Installation of this LED retrofit Kit assembly requires a person familiar with the construction and operation of the light
fixture’s/luminaire’s electrical system and the hazard involved. If not qualified, do not attempt installation. contact a qualified
electrician. • changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment. • Do not make or alter any open holes in an enclosure of wiring or electrical components during
kit installation. • To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
NOTICE:
noT for EMErgEncY LIghTIng.
NOTICE:
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part
15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. however, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: reorient or relocate the receiving antenna, increase the separation
between the equipment and the receiver, connect the equipment into an outlet on a circuit different from that to which the
receiver is connected, and consult the dealer or an experienced radio/TV technician for help. changes or modifications not
expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
WArrANTY
WHAT IS cOVErED
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five (5)
years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal
use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the
repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through
misuse, abuse, accident, modifications, alterations, neglect, or mishandling.
WHAT IS NOT cOVErED
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in anyway not in accordance
with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse,
abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not
apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear.
The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a
particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not
be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved in
the replacement or repair of said product.
contact the customer service Team at 1-877-527-0313 or visit www.homeDepot.com.
