8
Installation (continued)
D
D
A
B
C
CC
(fig 10).
7
Mount the light
fixture
☐
Once wiring connections are done, place
the light fixture (A) onto the mounting
plate (D) so the top sloped groove on
the plate rests on the top sloped groove
on the back of the fixture.
☐
Verify the fixture is flush with the mounting
surface and photocell (B) is pointed forward.
☐
Tighten the mounting plate tightening
screw (C) on the bottom of the fixture
(A) until the screw firmly pushes against
the mounting plate (D). (fig 10).
8
Caulk around the
light fixture
☐
Caulk around the mounting plate (D)
and surface with silicone sealant (not
included). (fig 11).
NOTICE:
Failure to properly caulk around the surface and
mounting plate (D) could lead to water damage and is not
covered under warranty.
NOTE:
When attaching the light fixture (A) to a
surface mount junction box, caulk between the
mounting plate and junction box.
(fig 11).
HOMEDEPOT.com
Please contact 1-844-584-3776 for further assistance.
Summary of Contents for 1005-954-834
Page 11: ......
