8
Battery Replacement
This fixture uses a Ni-Cd Rechargeable AA700 mAh 9.6 V battery.
To remove the battery:
□
Bend the battery catches away from the battery and remove the battery from the housing.
□
Disconnect the battery leads from the board terminal.
□
Connect the new battery to the board terminal.
□
Place the new battery in the battery location and ensure it is seated behind the battery catches (1).
1
Troubleshooting
Problem
Possible Cause
Solution
The LED charge indicator
does not illuminate.
AC power supply is off.
Ensure the unit has AC power supply. Restore the power
at the breaker/fuse box.
The unit is incorrectly
wired.
Ensure the unit is wired correctly.
The battery isn’t
connected.
Ensure the battery is connected.
The LED emergency
heads do not
illuminate.
The battery is
discharged.
Verify the unit is properly wired and connected to an AC
power source. Allow the unit to charge for 24 hours
and then re-test.
The battery isn’t
connected.
Ensure the battery is connected.
If the above troubleshooting does not resolve the issue, contact a qualified electrician, or call Commercial Electric
customer service at 1-877-527-0313.
