Page 21
DEHUMIDIFY
Ideal for reducing humidity.
• Keep window and door closed for the best dehumidifying effect
.
• Exhaust hose attachment is not required in this mode.
Draining in Dehumidify mode
• It is recommended that the dehumidification drain and drain hose be used for
continuous drainage.
• WATER FULL - When the water level reaches a predetermined level,
will be
indicated on the display. The unit will have to be drained.
NOTE:
· Refer to Water Drainage section.
• In this mode, fan speed is selected automatically by the appliance and can not
be set manually.
FAN
• Press the Fan Speed Button
to select Low, Medium or High Speed.
HEAT
(HEAT model CPT10HWB only)
• Select the target temperature 55˚F- 81˚F (13˚C-27˚C) by pressing the
or
buttons until the desired temperature is displayed on the LED screen.
• Press the Fan Speed Button
to select Low, Medium, High or Auto Speed.
NOTE:
At the beginning of this mode, you may have to wait a few seconds
before the appliance starts to give out hot air.
• In HEAT mode there will be water removed from the air and collected in the
tank, when the tank is full, the appliance shuts down and “ft” (FULL TANK)
appears on the display, the tank must be Emptied (See water drainage page).
The appliance will start up again.
• When operating in very cold rooms, the appliance defrosts automatically and
may disrupt normal operation. “Lt” (LOW TEMPERATURE) appears on the
display. The fan will continue operating for a few seconds to lower the interior.
• Temperature even after the appliance shuts off. In this mode, the fan may
operate for short periods even though the set temperature has been reached.
SET UP & USE