commercial cool CCF45P10, User Manual, Page: 8 / 60

Page 8
ENGLISH
SET UP & USE
INSTALLATION STEPS
NOTE:
All set screws must be checked and retightened where necessary, before and
after installation.
1
.
MOUNTING OPTION
A. DOWNROD MOUNT
• Using a Philips screwdriver, loosen the two upper jam screws on the yoke.
• Position downrod inside canopy.
• Route wires exiting yoke on motor through ceiling canopy and downrod.
• Position downrod/canopy into yoke and align holes between yoke and downrod.
• Insert bolt through the aligned openings between yoke and downrod.
Be careful
not to damage or cut the fan wires.
• Tighten flat washer, lock washer, and nut and bolt ( not included on some
models
). Secure with cotter pin through hole in the end of the bolt.
• Secure downrod in position by tightening upper jam screws.
Bolt
Flat
Washer
Cotter Pin
Yoke
Jam
Screw
Fig.2a
Bolt
Cotter
Flat
Washer
Pin
Fig.2b
Yoke
Jam
Screw
CAUTION
Do not loosen two
lower jam screws
Fig.2c