Page 7
ENGLISH
OPERATION INSTRUCTIONS
HOW TO FILL WITH WATER
1. Set the Steam Control Knob to “0” and the
Temperature Control Dial to “MIN.”
2. Unplug the iron from the wall outlet, and wait for the
iron to cool down.
3. Pour water into the Water Inlet: -Fill up to the
maximum level “MAX.” Do not over fill.
CHOICE OF WATER
This iron can be used with normal tap water. If the water in your area is particularly
hard, it is advisable to use distilled or demineralized water. Do not use chemically
descaled water or any other liquids for refilling
.
TEMPERATURE SETTING
1. Stand the iron upright on a stable surface. Insert the plug in the wall socket.
2. Turn the Temperature Control Dial to the desired temperature setting.
3. The desired temperature has been reached when the thermostat operating light
has turned off. The thermostat operating light will turn on and off from time to
time, indicating that the selected temperature is being maintained.
TEMPERATURE CONTROL SETTING
1. Always check garment label for ironing instructions
before ironing garment.
2. First you should sort the laundry: Wool with wool,
Cotton with cotton etc. Start ironing the fabrics requiring
the lowest temperature and progress to the higher ones
because the iron heats up quicker than it cools down.
3. If the fabric consist of various kinds of fibres (e.g. cotton
with polyester) you must always select the ironing
temperature for the material with the lowest advised
temperature.
SET UP & USE
max
