Commend Duetto EE 980, Product Manual

Page: 54 / 172

WebConfig configuration Control Station Duetto
54 1.7/1217
Consumers

HTTP port : In this field, the HTTP port of the camera server that can be accessed through a web
browser or third-party application can be changed.
→
By default: 7742

Consumer : Shows the allocated profile number of the respective camera. This parameter is re-
quired to gain access to the desired video stream through a web browser or third-party application.

Camera : In this field, enter the number of a configured camera to reference it with this profile.
 Resolution : In this drop-down list, the resolution of the camera can be selected.

FPS : Move the slider to the desired frames-per-second value for the consumer.

Type : In this drop-down list, the type of the consumer can be selected. The following types are
available:

HTTP Surveillance : The consumer can always be triggered by a web browser or third-party
application. The referenced camera stream cannot be muted during a conversation. The checkbox
Enable authentication will be activated ( see page 54 ).

HTTP Call : The consumer can be triggered by a web browser or third-party application. The
referenced camera stream can be muted during a conversation. The checkbox Enable authenti-
cation will be activated ( see page 54 ).

SIP Video : The consumer is used for a SIP video conversation, but cannot be accessed via a web
browser or a third-party application. The referenced camera stream can be muted during a
conversation.
 (Optional) Enable authentication : Activate this checkbox to enable an authentication at the select-
ed external or internal camera before an HTTP client can request the video stream of the camera. The
fields Username and Password will be activated.
 Username : In this field, enter the user name to gain access to the video stream of the camera (if
required).

Password : In this field, enter the password to gain access to the video stream of the camera (if re-
quired).
 Delete : Click on this button to delete the entire configuration of the consumer (the referenced
camera will not be deleted).
 Add Consumer : Click on this button to add a new consumer.
 Click on the button APPLY to save the settings.
ATTENTION: Do not use well-known port numbers
Do not use any well-known port numbers for the HTTP port (e.g. “8080”)!
NOTE: Cameras as profiles
Only numbers of configured cameras are valid entries.
ATTENTION: Camera resolution
The resolution is limited to 640 x 480 pixels!
ATTENTION: Configuration of a call via HTTP

Only one consumer can be configured as the type “SIP Video” or “HTTP Call”!
 If there is more than one consumer with the type “HTTP Surveillance” for the same camera
number, the consumer with the highest resolution / FPS setting will be displayed!
1.3
1.3
1.3