LV-67Z User’s Manual
-11-
2.3.2 <Clear CMOS and Power on type selection>
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to
inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its
default values.
JAT
: AT/ATX mode select jumper
Jumper settings
Function
1-2
AT mode
2-3
ATX mode (Default)
JRTC
: Clear CMOS data jumper
2.4 <I/O interface>
2.4.1 <Serial ATA interface>
SATA 1/2
: SATA3 7-pin connector
mSATA and SATA3-2 can’t not use at the same time
Jumper settings
Function
1-2
Clear CMOS
2-3
Normal (Default)
Pin
Signal
1
GND
2
TX+
3
TX-
4
GND
5
RX-
6
RX+
7
GND
7 1
SATA3-2
SATA3-1
JRTC
JAT
3
1
3
1