Commell LV-67J User Manual Download Page 18 | Manualshive

Page: 18 / 46

Commell LV-67J User Manual Download Page 18

LV-67J User’s Manual

18

2.6 <Serial ATA installation>

LV-67J

has Two Serial ATA II & Two Serial ATA III interfaces with RAID function, the transfer

rate of the Serial ATA II can be up to 300MB/s & Serial ATA III can be up to 600MB/s. Please

go to

http://www.serialata.org/

for more about Serial ATA technology information. Based on

Intel

® PCH

, it supports

Intel

®

Matrix Storage Technology

with combination of RAID 0,1,5

and 10. The main features of RAID on Intel® Q67 PCH are listed below:

1. Supports for up to RAID volumes on a single, two-hard drive RAID array.

2. Supports for two, two-hard drive RAID arrays on any of six Serial ATA ports.

3. Supports for Serial ATA ATAPI devices.

4. Supports for RAID spares and automatic rebuild.

5. Supports on RAID arrays, including NCQ and native hot plug.

For more information please visit Intel’s official website.

For more about the system setup for Serial ATA, please check the chapter of SATA

configuration.

SATA1/2/3/4

«
...
16
17
18
19
20
...
»

Summary of Contents for LV-67J















































Reviews:

No comments