LS-37B User’s Manual
-42-
3.4 <SATA RAID Configuration>
The board integrates Intel
®
QM77 PCH with RAID function for Serial ATA drives, and
supports the configurations below:
RAID 0 (Stripping)
: Two hard drives operating as one drive for optimized data R/W
performance. It needs two unused drives to build this operation.
RAID 1 (Mirroring)
: Copies the data from first drive to second drive for data security,
and if one drive fails, the system would access the applications to the workable drive. It
needs two unused drives or one used and one unused drive to build this operation. The
second drive must be the same or lager size than first one.
If you need to install an operation system on the RAID set, please use the driver disk
attached in the package when it informs you to obtain the RAID drivers.
Please press
<CTRL+I>
to enter the RAID configuration menu.
You can setup the RAID under operation system for Microsoft
®
Windows XP SP1 ,
please install the Intel
®
Application Accelerator Ver.4.5 later to support RAID
configuration with Intel
®
Matrix Storage Technology.