manualshive.com logo in svg

Commell FS-97D, User Manual, Page: 19 / 59

Share
Download
Commell FS-97D User Manual Download Page 19

FS-97D User’s Manual                                                                                  Hardware Setup 

Serial ATA installation 

19 

2.6 <Serial ATA installation> 

FS-97D

 has six Serial ATA II interfaces with RAID function, the transfer rate of the Serial 

ATA II can be up to 300MB/s. Please go to 

http://www.serialata.org/

 for more about Serial 

ATA technology information. Based on Intel

®

 ICH9DO, it supports 

Intel

®

 Matrix Storage 

Technology

 with combination of RAID 0,1,5 and 10. The main features of RAID on 

ICH9DO are listed below: 

1.  Supports for up to RAID volumes on a single, two-hard drive RAID array. 

2.  Supports for two, two-hard drive RAID arrays on any of six Serial ATA ports. 

3.  Supports for Serial ATA ATAPI devices. 

4.  Supports for RAID spares and automatic rebuild. 

5.  Supports on RAID arrays, including NCQ and native hot plug. 

For more information please visit Intel’s official website. 

For more about the system setup for Serial ATA, please check the chapter of SATA 

configuration. 

 

 

 

 

 

S_ATA1~6

SATA 1~6

Summary of Contents for FS-97D




























































Reviews:

No comments