7
Every time the volume switch is pressed, the volume level changes from normal
→
high
→
low
→
normal
→
high in this order. If no input for 3 seconds, the device stores the last input value and
goes in to standby mode.
•
•
Call Volume Adjustment
While in talking mode, press the
⑦
Volume switch to adjust the call volume. There are 3 levels
(low-normal-high) of volume adjustments available and default is set as ‘normal’. Every time the
volume switch is pressed, the volume level changes from normal
→
high
→
low
→
normal
→
high in
order. If no input for 3 seconds, the device stores the last input value and goes in to standby mode.
•
•
When Sub device (WI-249LS) Pages Main device (WI-249LM)
When a sub device (WI-249LS) pages the main device (WI-249LM), the seven-segment display on
the main device (WI-249LM) displays the ID number of the sub device (the number allocated to the
sub device from the pairing process). When paged, the display blinks repeatedly every 0.25
seconds.
•
•
When Main device (WI-249LM) Pages Sub device (WI-249LS)
Use the
⑤
Select button to choose a sub device you wish to page and press the
④
Paging button.
While paging, the display blinks repeatedly every 0.25 seconds. If the
④
Paging button is pressed
without any sub device being selected, the sub device with the allocated number ‘00’ will be paged
(*** the main device WI-249LM can page any sub-devices only when the sub devices are
connected to DC power adaptor, not running on batteries).
•
•
To Hang Up the Call
Simply press the paging button once again to hang up the call. While in talking mode, the display
blinks repeatedly every 0.05 seconds.
•
•
Time Limit for Paging Mode
Paging time is limited to 30 seconds. After 30 seconds, paging stops and the device goes in to
standby mode.
•
•
Time Limit for Talking Mode
Talking mode is limited to 3 minutes. After 3 minutes, the call is ended and the device goes in to
standby mode.
•
•
Pagine Tone
The paging tone is as follows :
Sol-Mi-Do Sol-Mi-Dol
→
2 second pausel
→
Sol-Mi-Do Sol-Mi-Dol
→
2 second pausel
→
Sol-Mi-Do
Sol-Mi-Dol
→
Repeat until answered and/or stops paging after 30 seconds.
•
•
Low Voltage Indication of Sub devices on the Main device display
If the sub devices (WI-249LS) are running on batteries and the batteries are low, the sub device will
send the low voltage information to the main device as paging the main device.
The FND display on the main device, after disconnecting with the sub device, displays the ID
