3
1. Depress the battery lid to open and install 4 standard AA type 1.5V
batteries by connecting the snap-on lead to the battery terminals.
2. When you want to talk with the other party, raise the handset and
press the call button this sends a call tone to the other station.
3. When the bell is ringing, raise the handset and speak with the
4. On completion of the conversation, replace the handset.
NOTE :
1) Can control the sound of bell rings by use volume switch.
the volume switch at “L” position, volume is low but setting at “H”
2) If you don't want to use dry battery, you can use 6V DC adaptor
(over than 200mA) as an alternative.
3) On completion of the conversation, power is automatically cut off
when the handset is replaced in the cradle; always ensure that the
handset is properly located to avoid excessive battery drain.
3. Operation
other party like telephone.
As example, you may setting on
position, volume is higher
4. Connection
5. Wiring
The unit may also be used with 6VDC power supply.
It is required to use Voltage Regulation DC Power
Supply for safety operation.
⇧
⇧
AA(UM-3) Size
INTERPHONE
BATTERY
⇧
POWER SUPPLY
