37
①
Press Program Button "P".
②
Press Management Password.
③
Press Call Button "E".
④
Press "14" (number fourteen).
⑤
Press Call Button "E".
⑥
Press the Unit Number and press Call Button "E".
⑦
Press "0" (number zero as Master lobby phone or Press a corresponding lobby phone
number) and press Call Button "E". Status of the household unit appears (Please refer to
below for the status).
⑧
To check another unit status, repeat 6 & 7 procedures.
⑨
As the status check is done press Cancel Button "X" to exit.
Status of household unit indication
•
Standby : standby mode (applies even when the household unit
monitor is communicating with an individual door phone of
the unit or via telephone line).
•
Busy Line : Busy mode (applies when the household unit monitor is
communicating with another household unit or security
station.
•
Away status : Away mode
•
Emergency : in case of emergency (emergency, fire, gas leak, burglar)
•
Error : Communication failure/error (Please check the unit's
videophone).
Summary of Contents for DRC-GUM/RF1
