1. Overview
LED & Sensor
Microphone
Camera Lens
Speaker
Call Button
Angle Adjustment Lever
Volume Adjuster
Monitor Connection Terminal
Door Release
Connection Line
2. Wiring and Installation
1. Match the fix the whole in the wall and the fixing
2. Match and connect monitor line as shown below
(#1: Audio, #2: GND, #3: DC12V, #4: Video)
3. Adjust camera location on the wall by checking
4. Connect the Door Release Connection Line as
5. Tighten a screw at the bottom side of the camera
fixing bracket [FIG.1]
[FIG.2]
the image on monitor screen and fix its location
shown below [FIG.2]
[FIG.1]
SCREW M3X8 (1EA)
▶
Position of camera
66.5°
Screw Hole
SCREW T4X18 (2EA)
Power Source
Door Release
Wiring
Installation
[FIG.1]
[FIG.2]
▶
▶