3
1. Align holes on the wall where the unit is
and secure.
FIG-1 : Install the camera at a 30
˚
angle to
(install the bracket in reverse
˚
to the right)
FIG-2 : Install the camera at a perpendicular
2. Wire the household monitor cables as
picture below[FIG-3]
(#1:RED/VOICE, #2:BLUE/GND,
3. Wire the door release cable as shown in
4. Tighten using bolts and a wrench, then
2. Wiring & Installation
[FIG-3]
to be installed with mounting brackets hole
the left
to angle 30
angle to the front
shown below with matched polarity as
#3:YELLOW/DC12V, #4:BLACK/VIDEO)
the diagram.[FIG-3]
cover using the AL. screw covers.
#1: RED(VOICE)
#2: BLUE(GND)
#3: 12V)
#4: BLACK(VIDEO)
5
.
It is recommended to use coaxial cable
for video (VD) line and GND line during
wiring of door camera and video monitor.
When using UTP cable, video quality
may be degraded.
Summary of Contents for DRC-4CPHD2
Page 4: ...4 FIG 1 FIG 2...
Page 6: ...6 3 Package...
