12
8. Note On Use and Installation
Do Not Aim The Camera At The
Sun
Do not aim the camera at the sun or
point it at the sun even if you are not
shooting.
Do Not Shoot Intense Light
Framing intense light such as a spot-
light may cause bloom or smear. A
vertical stripe may appear on the
screen. However, this is not a mal-
function.
Treat The Camera With Care
Do not drop the camera or subject it
strong shock of vibration. Otherwise,
the camera may malfunction.
Never Touch Internal Parts
Do not touch the internal parts of the
camera other than that parts speci-
fied. Otherwise, the camera may
malfunction.
Plug off when you do not intend
to use the camara for a long time.
Do Not Slash Water On The Camera
Install the camera where the camera can be kept
dry. If the camera gets wet, turn off the power
and contact you dealer.
Install The Camera Where No Video Noise
Appears
If cables are wired near electric lightning wires or
a TV set, noise may appear in images. In this
event, relocate cables or reinstall equipment.
Check The Ambient Temperature And
Humidity
Avoid using the camera where the temperature
is hotter or colder than specified. Otherwise, the
quality of images may deteriorate or internal
parts may be affected. Special care is required
to use the camera at high temperature and
humidity.
Should You Notice Any Trouble
If any trouble occurs while you are using the
camera, turn off the power and contact your
dealer. If you continue to use the camera when
there is someting wrong with it, the trouble may
much worse and an unpredictable accident may
occur.
