6
5
.
How to open the door using keypad button
* Note: If you press 'Call button' during operation, you can cancel the current operation.
1. How to set the door open password
1-1 If you know the current password
(1) Press '
↵
' button for more than 2 seconds: The beep sound is heard and LED light is on.
(2) Enter current password (Initial value: '1234')
(3) Press '
↵
' button for more than 2 seconds
☞
Enter password setting mode : LED light to start blinking and new password can be set.
(4) Enter new password: Enter the new password to use. (4 to 12 digits)
(5) Press ‘
↵
’ button for more than 2 seconds: After beep sound, password has been changed.
1-2 If you forget your current password (It can be used when connected household monitor)
(1) Repeat pushing door open button on household monitor more than 7 times quickly.
(in less than 20 seconds)
☞
Enter password setting mode : LED light to start blinking and new password can be set.
(Caution: To prevent malfunction, please do not repeat pushing door open button normally.)
(2) Enter new password: Enter the new password to use. (4 to 12 digits)
(3) Press ‘
↵
’ button for more than 2 seconds: After beep sound, password has been changed.
2. How to open door using password
2-1. Lock 1 open : ‘1’ + ‘
↵
’ + Pa ‘
↵
’
☞
Exit the mode after opening the 1st door lock with the door opening sound. (Tu-ru-ru)
2-2. Lock 2 open : ‘2’ + ‘
↵
’ + Pa ‘
↵
’
☞
Exit the mode after opening the 2nd door lock with the door opening sound. (Tu-ru-ru)
* Cautions *
- Please set the password after installation. (Initial password can not be used.)
(For security reasons, 1234 and 4321 can not be set as the password.)
- If you enter wrong password, the setting mode is ended with a failure sound. (toot-toot)
- The setting mode is ended when there is no password input on household monitor for 1 minute
after entering the password input mode.
- The setting mode is ended when there is no additional input for 20 seconds during input.
(Even if you press
‘
↵
’
button during password setting, it can not be saved and only the number
is recognized and saved.)
* Cautions *
- If the door open button of household monitor is pushed when using password, the operation
is canceled.
- If the power of the camera is cut off due to black-out or other reasons, the door will not
open. Please prepare a separate emergency key in case of emergency.
